Accessory [ru]

500001 Calibration certificate [ru]

for new measuring devices FLS / DLS (must be ordered together with the device)

500002 Recalibration Ceritficate [ru]

Recalibration with calibration certificate for used measuring devices DLS/FLS

500214 DIMS Profibus external Interface [ru]

Profibus/RS-422 converter, IP20 module, mountable on 35 mm DIN rail applicable for DLS/FLS

500215 Numeric Digital Display [ru]

Numeric digital display 6 digits Char. height 14mm; LED red; RS-232/485; Reading distance: 1…5m applicable for DLS/FLS

500202 AO / DO Connection Cable FLS/DLS [ru]

AO/DO Connection cable Length = 3m, with 15 pin connector IP65 applicable for DLS/FLS

500203 RS-422/SSI Connection Cable FLS/DLS [ru]

RS-422 Connection cable DLS/FLS Length = 5m, with 15 pin connector IP65   Special lenghts on request. Please contact us.

500253 Connector 90° IP65 for 15 Pin D-Sub Connector [ru]

Connector 90° IP65 for 15 pin D-Sub connector maximum cable diameter is 5 mm applicable for DLS/FLS

500290 Connector straight IP65 for 15 Pin D-Sub Connector [ru]

cable diameter range 6 to 10 mm applicable for DLS/FLS

500209 Converter USB to RS-232 [ru]

USB to serial port converter. It provides a connection from the sensor to the USB port of a PC, notebook or handheld computer device.

500210 Converter RS-232 to RS-422 [ru]

IP20 module, mountable on 35 mm DIN rail applicable for DLS/FLS

500291 Ferrite for Cable 6.5mm [ru]

Ferrite for cable diameter 6.5 mm

500292 Ferrite for Cable 10mm [ru]

Ferrite for cable diameter 10 mm

500293 Ferrite for Cable Diameter 13mm [ru]

Ferrite for cable diameter 13 mm

500294 Cable Gland [ru]

Cable Gland M16x1.5

500114 Reflective Foil 600 x 1200mm [ru]

The reflective foil provides a defined highly reflecting measuring target. It improves the reflected signal strength. This improved signal strength is used by the D-Series to measure long distance ranges. Please check the device specification to ensure the applicable minimum distances.

500113 Reflective Plate 210 x 297 mm [ru]

The reflective aluminum target plate provides a defined measuring target. It improves the reflected signal strength. This improved signal strength is used by the D-Series to measure long distance ranges. Please check the device specification to ensure the applicable minimum distances.